SORD M5 User Manual page 12

When you want the M5 to read a pro­
gram without reading the preceding
programs:
Method 1:
1. Start from step 6.
2. When the name of a program you
don't want is displayed, press the
RESET key. This tells the M5 to
ignore that program, the tape
keeps playing, and the M5 reads
the next program automatically.
Method 2:
Using the tape counter as your guide,
fast forward the tape to slightly before
the program you want the M5 to read.
Then start from step 6 to enable the
M5 to read the program.
* Between each program on the tape is
an empty space. A beep indicates the
beginning of a program. To correlate pro­
grams with the tape counter, disconnect
the jacks, play the tape, then note down
the numbers on the counter when the
beeps sound.
These methods can also be used on
other tapes.
Adjusting Display Colors When the M5 Is
Connected to Your TV
First, load the TV adjustment program tape as described
on pp 8 & 9. The picture appears and you should hear
a beep. Adjust the picture using the switches on the
When Entering Data
Press the 2 key while holding the FUNC
key down to change to graphics character
input from the keyboard.
When graphics characters are entered,
the cursor is represented by character G.
Pressing the 1 and FUNC keys changes
the cursor back to character A to enable
you to enter alphabetic characters.lf you
notice a mistake before pressing the
RETURN key, press the DEL and CTRL
keys simultaneously. Pressing the DEL
key backspaces the cursor to the pre­
vious character position. The erroneous
character is deleted and you can reenter
data. The cursor backspaces once
each time you press the DEL key.
If you notice your mistake after pressing
the RETURN key: the cursor reappears
on the screen. Enter the correct data.
Keys to delete the
last character input.
Keys to change the
type of input characters
to alphabetic.
J © S O 0 0 ® 0 0 0 0 D P S G
"B ® 0 0 ® 0 0 0 0 0 ® DDCE]
EDBK00®roSO O 0DCED !
front or side of your set so that the display is clear.
Also, set the volume appropriately.
The aim is to adjust the picture so that you will be able
to watch is without straining your eyes.
*Tuning switches are usually set to standard positions.
10