SORD M5 User Manual page 11

There are three game programs sup­
plied on tape: a TV test pattern pro­
gram for adjusting your color TV to the
M5, a " ZAC BANIC" game program,
and a " BASEBALL" game program.
.
6
Having loaded the tape in the tape re­
corder, press the PLAY button. If the
tape recorder doesn't have a remote
terminal, perform step 7 before this
, step.
7. Press keys T A P E and RETURN
in that order.
You should hear a click, the tape starts
playing automatically, and the M5 reads
the first program. The program name
is displayed on the screen.
When the M5 finishes reading the pro­
gram, you should hear another click,
then the tape stops automatically.
*lf your tape recorder does not have a
remote terminal, the tape will not start
or stop automatically. In this case, per­
form step 7 before step 6. When the
entire program has been read off the
tape and the game display appears on
the screen, press the Stop button on
the tape recorder.
*The recorder volume control should be set at 8 or 9 to
ensure reliable operation.
TV's and other electrical appliances may be a source of
noise which can interfere with proper recording onto
cassette tape. Keep your tape recorder away from such
possible sources of interference.
If you don't hear a click and the tape keeps playing,
this means that the M5 hasn't read the program. In
this case, do the following:
1. Stop the tape.
2. Switch the power off, then back on again.
3. Rewind the tape. (If the recorder has a remote
terminal, disconnect the jack from It to enable
you to rewind.)
4. Reconnect the jack to the remote terminal.
5. Turn the recorder's playback volume up.
6. Repeat steps 6 and 7.
• We recommend you establish a suitable volume
level, then mark it.
8.
To read the next program after the M5
has finished reading the first program:
Press the SHIFT and RETURN keys
at the same time. The tape starts
playing automatically from when it
stopped, and the M5 starts reading
the next program.
When the M5 has read the next program,
the tape stops automatically and the base­
ball game is displayed.
*lf using a tape recorder without a remote
terminal, first rewind the tape a little, then
perform step 7 and press the play button.
, ..
0©© © £>G )© G )0© D D D tE]
G D B G }0® BK)® O D 0D G p
Shift keys
(either can be pressed)
When you finish playing the baseball
game and you want to go on to play " Zac
Banic" , perform step 8 again.
9
^ r-r.--ai
0 -
— Reset key
— Return key