Running Your M5 - SORD M5 User Manual

Running Your M5

Now that you've connected the power
supply, TV and tape recorder to your M5...
1. Open the cover
Lift the cover gently as shown in the dia­
gram. If you want to remove the cover,
be sure and put it
.
2
Insert the BASIC-I program cartridge
Initially you may have to push the car­
tridge quite hard to insert it properly.
* Never insert or remove a cartridge while
3. Switch on the power supply
*The cartridge must be inserted before
you turn the power on.
Power supply
Set the
switch to ON
4. If the TV picture is wavy or fuzzy, adjust
it using the tuner.
For a rotary switch
*lf the picture still moves up and down or
right and left:
Vertical
hold
Horizontal
hold
Are the words BASIC-I, READY and the
character A displayed on the screen as
shown below, and is character A (cursor)
blinking?
5. Load the supplied program tape in the
cassette tape recorder. Make sure the
tape is fully rewound. (If you discon­
The red light
goes on.
nected the remote lead, don't forget
to connect it again.)
8
Tuning switch:
to adjust, press
switch in and
turn.
For electronic tuning
Use this control if the picture is
moving up and down.
Use this control if the picture is
moving right to left.
On some TV's the letters
may be cut off on the
left.
B a s i c -
R e a d y
El
Tuning switches
(preset)
k