Reading Lamps When Using - Panasonic ES‑RT47 Operating Instructions Manual

3
3
Whilepressingand
holdingthetrimming
heightswitchbutton,move
thecombverticallytothe
desiredtrimminglength
(between1mmand7mm).
Trimming
height (mm) 1.0 2.5 4.0 5.5 7.0
(approx.)
Indicator 1.0 2.5 4.0 5.5 7.0
• Actual hair length will be a little
longer than the height you set.
4
4
Lightlypushthecomb
attachmenttoensurethat
ithaslockedintoplace.
5
5
Turntheshaveron,bringthecombofthe
combattachmentintocontactwiththeskin,
andcutthebeardbymovingthetrimmerback
againsttheflowofthebeard.
ES-RT47_ME.indb 11
Notes
• Be careful not to cut your hand on the blade when attaching
and removing the comb attachment.
• Do not use with shaving creams applied or when the beard is
wet. Wet beard can stick to the skin or clump making it difficult
for the blade to cut.
• Comb beard and sideburns before trimming.
• Hair trimmings may collect inside the comb attachment when a
large volume of beard is cut, so discard hair trimmings after each
use.
• If the comb attachment is not attached properly, it may become
loose during use resulting in excessive cutting.
Readinglampswhenusing
During use
All lamps disappear while using.
• You can shave 2 to 3 times after the battery capacity lamp blinks.
(This will differ depending on usage.)
• A full charge will supply enough power for approx. 18 shaves of 3
minutes each. (This will differ depending on usage.)
When the battery capacity is
low
The battery capacity lamp
blinks for 5 seconds when the
power switch is pressed.
11
2014/04/24 18:50:16