Bakare Evolution Series Instructions Manual page 21

Caution ! The function rendering the Evolution
100 model ready for transport may only be set
during the time when the bed is being trans-
ported, and must then be reset by moving the
lying surface to the raised position!
Evolution 200
The Evolution 200 model (can be
transported in any position) is equip-
ped with a central roller fixing on each
axle, which is operated mechanically
using foot pedals. The foot pedals are
located to the left and right sides in the
foot area of the chassis.
The Evolution 200 model has two different settings:
1. Central blocking of castors
(foot lever in lower position)
2. 4 castors released for 360°
(foot lever in upper position)
Caution: The hospital bed can be transported
with the lying surface in any position. This should
only be performed in exceptional situations
and under supervision of nursing personnel.
Ensure the safety of the occupant!
Evolution 300
The Evolution 300 model (can be trans-
ported in any position) is equipped
with a central roller fixing, which is
operated mechanically using a central
foot pedal. The foot pedal is located
in the centre of the foot area of the
chassis.
The Evolution 300 model has two different settings::
1. Central blocking of castors
(foot lever in lower position)
2. 4 castors released for 360°
(foot lever in upper position)
Caution: The hospital bed can be transpor-
ted with the lying surface in any position. This
should only be performed in exceptional situa-
tions and under supervision of nursing person-
nel. Ensure the safety of the occupant!
Evolution 400
The Evolution 400 model (can be transported in any position)
is equipped with a central roller fixing on each axle, which is
operated mechanically using foot pedals. The foot pedals are
located to the left and right sides in the foot area of the chassis.
| 21