Function Description; Backrest (Rl); Mechanical Unlocking Of The Backrest (Option); Upper Leg Section (Ot) - Bakare Evolution Series Instructions Manual

F U N C T I O N D E S C R I P T I O N
Depending on the model and type of hospital bed, the bed can
be used in the following positions by adjusting the backrest, the
upper and lower leg sections as well as the height:

Backrest (RL)

Die Verstellung der Rückenlehne erfolgt über die entsprechen-
den Tasten des Handschalters.
The movement sequence of the RL enables a length compen-
sation at the head section of the bed of 120 mm.
This function (mattress compensation) permits the patient to
adopt a comfortable sitting position without being compressed
or restricted in movement in the abdomen and upper body.
Mechanical unlocking of
the backrest (option)
When operating the mechanical unlocking, hold the backrest
firmly in the set position and reduce force slightly where neces-
sary. Then pull firmly on the unlocking mechanism of the RL
until the RL is significantly lowered. Slowly lower the RL to the
end position.
18 |
Engaging the unlocking mechanism:
Press the corresponding button on the hand control unit down-
wards until the sound of the motor is no longer audible. Then
press the button on the hand control unit upwards until an
audible locking sound can be heard. The electric RL function
is once again active.

Upper leg section (OT)

(Operating buttons backrest)
The OT is adjusted by means of the corresponding buttons on
the hand control unit.
For safety reasons, this position may only be set by medical
personnel.
The lower leg section (UT) can be set to the horizontal position
by nursing personnel using a fine locking device.

Height adjustment (HV)

The HV is adjusted by means of the corresponding buttons on
the hand control unit.
(Operating buttons upper leg sectionl)
(Operating buttons height adjustment)