Table of Contents
Advertisement
Installation Tips
How to use Quick-Connect fitting
To connect:
1. Check and cut the tubing end squarely and cleanly with utility knife or scissors.
2. Make a mark ½ inch from the end of the tubing, this mark will help guide the tubing
installation.
3. Fully insert the tubing until the mark is no longer visible. This ensures that it is sealed by the O-
ring inside the fitting. Pop the blue lock clip back on the fitting. This will lock the tube in place
and prevent it from moving.
Page 4
www.purifiltration.com
| (678) 900-4702 |
support@purifiltration.com
Advertisement
Table of Contents
