VentMed CPAP User Manual page 34

User Guide
RF emissions
CISPR11
Harmonic emissions Class A
IEC61000-3-2
Voltage fluctuation
/flicker emissions
IEC61000-3-3
Guidance and manufacturer's declaration - electromagnetic immunity – this
device is intended for use in the electromagnetic environment specified below. The
user of the device should make sure that it is used in such an environment.
Immunity test IEC60601
level
Electrostatic ±6KV contact
discharge ±8KV air
(ESD)
IEC61000-4-
2
Electrical fast ±2KV for
transient / power supply lines power supply lines
burst
±1KV for
IEC61000-4- input/output lines input/output lines
interference in nearby electronic equipment.
Class B This device is suitable for use in all
establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network
Conformity that supplies buildings used for domestic
purposes.
test Compliance level Electromagnetic
±6KV contact
±8KV air
±2KV for
±1KV for
33
VentMed
environment-guidance
Floor should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should be
at least 30%.
Mains power quality
should be that of a typical
home or hospital.