Table of Contents
Advertisement
4
Lock the end fitting with screw (2). Torque: 6
Nm (53 inch lbs).
T71FC
2
6
Align bushing (3) recess with hole (C) and
lock it by means of screw (4). Torque: 6 Nm (53
inch lbs).
T71FC
C
4
8
Fix the conduit every 2 m (6"). The conduit must not be fixed to the electric wires. Bulkhead openings
require a minimum 38mm (1½") hole diameter.
DANGER
Prevent any dust or foreign material from contacting
the cable end to avoid damages to the helm.
DANGER
Make sure the conduit does not enter in contact with
cutting edges that could damage it.
DANGER
This control must be carried out before the boat is operated in the water.
9
Make sure the direction of the steering wheel rotation corresponds to the boat direction.
page 10
of 15 -
T71FC-T72FC STEERING SYSTEMS
T72FC
2
T72FC
C
4
Installation and maintenance manual
5
Slide bushing (3) over the helix cable and
introduce it into hole (B) of the helm.
T71FC
3
B
7
Insert protection pipe (5) on bushing (3).
T71FC
T72FC
B
5
T72FC
3
5
Hide quick links:
Advertisement
Table of Contents
