Using Your Refrigerator; Setting The Controls; Changing The Control Settings; Recommended Control Settings - Whirlpool ED22PM Use & Care Manual

I I I'
Using your refrigerator
FREEZER CbNTROL
REFRlGERATOh CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time...
1.
Set the REFRIG
CONTROL to 3
2. Set the FREEZE
CONTROL to B.
Changing the control settings...
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
POWiR SAVING CONTROL LIGHT SWITCH
Give the refrigerator time to cool down com-
pletely before adding food.
(This may take sev-
eral hours.)
These settings should be about right for nor-
mal household refrigemtor usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream is
firm.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUEsTIONS?
. ..call your
If Refrigerator
COOL-LINE R Section is
service
TOO COLD
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough]
Controls not set correctly
for your conditions
assistance
telephone
If ICE isn't
number
MADE FAST ENOUGH
(page 151.
If BOTH SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature
(can't cycle often enough]
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
Power Saver Control...
The
Power Saver Control
on the Control Console
operates electric heaters around the door open-
ings. These heaters help keep moisture from form-
ing on the outside of the refrigerator.
1.
2.
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Use the "CONSUMES LESS ENERGY" setting when
humidity is low.
Use the "REDUCES EXTERIOR MOISTURE" setting if
moisture forms on the outside of the refrigerator.
The indicator light will glow when the switch is in
the "REDUCES EXTERIOR MOISTURE" position.