Table of Contents
Advertisement
Using Your Refrigerator
Continued
Changing
the light bulbs
Electrical
Shock Hazard
Before removing
a light bulb, either unplug
the refrigerator
or disconnect
the electricity
leading to the refrigerator
at the main power
supply. Failure to do so could result in
electrical
shock or personal
injury.
To change
refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to find bulb.
3. Remove bulb.
4. Replace with a 40-watt tubular appliance bulb.
5. Reconnect to power supply.
To change
freezer
light:
1. Disconnect refrigerator from power supply.
2. Grasp the top and bottom of the light shield.
3. Squeeze and pull light shield out.
4. Replace bulb with a 40-watt appliance bulb.
5. Replace the light shield.
6. Reconnect power supply.
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with one
of the same size and shape.
Removing
the base grille
To remove
the grille:
1. Open the door.
2. Pull grille out as shown.
3. Do not remove
Tech Sheet fastened
behind grille.
To replace
the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the door.
See cleaning instructions for defrost pan and
condenser coils on page 11.
defrost pan
Advertisement
Table of Contents
