Download Print this page

Panasonic Lumix DMW-BTC14 Series Operating Instructions Manual page 4

Advertisement

(For the U.S.A. and CANADA)
AC adaptor
This AC adaptor operates on AC between 100 V and 240 V.
But
• In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC
power supply only.
• When connecting to an AC supply outside of the U.S.A. or Canada, use a
plug adaptor to suit the AC outlet configuration.
• When connecting to a supply of greater than AC 125 V, ensure the cord you use
is suited to the voltage of the AC supply and the rated current of the AC adaptor.
• Contact an electrical parts distributor for assistance in selecting a suitable
AC plug adaptor or AC cord set.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
• Any unauthorized changes or modifications to this equipment would void the
user's authority to operate this device.
• To assure continued compliance, follow the attached installation instructions and
use only shielded interface cables with ferrite core when connecting to computer
or peripheral devices.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Supplier's Declaration of Conformity
Trade Name:
Model No.:
Responsible Party: Panasonic Corporation of North America,
Support Contact: http://shop.panasonic.com/support
4
DVQX1721 (ENG)
Panasonic
DMW-BTC14
Two Riverfront Plaza, Newark, NJ 07102-5490

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Lumix dmw-btc14 ppLumix dmw-btc14 eLumix dmw-btc14 ebLumix dmw-btc14 gcLumix dmw-btc14 gn