Two notes Audio Engineering Torpedo Captor X User Manual page 22

Last
update:
torpedo_captor_x:torpedo_captor_x_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_captor_x:torpedo_captor_x_user_s_manual
2020/09/07
14:44
You can set a different EQ on the right output. All the parameters of the EQ are the
same as the general EQ. See section 4.2.3.2 for the description of each mode,band,
and setting.
4.4.2.2 Dry/Wet reverb setting
You can set 2 different Dry/wet reverb levels for each XLR outputs. The parameter in the reverb rack
is only editable through Torpedo Remote. Depending on the SPACE knob assignment, the Dry/wet in
the reverb rack will affect the Left or the Right XLR output.
4.4.2.3 Space knob assignement
It is possible to set different behaviours to the SPACE Knob:
SPACE knob
assignement
4.4.2.4 The "Bypass Torpedo Processing"
When the Bypass button is activated on the Right output channel, the whole Torpedo process
is bypassed. The Right XLR output is sending the dry amp sound. This is an ideal setup when
you wish to record your amp. You will record the full cab sim signal from the Left XLR output,
while at the same time recording the dry amp sound from the Right XLR output.
4.5 Tuner
https://wiki.two-notes.com/
Behavior
The SPACE knob controls the Dry/Wet Reverb level for both XLR outputs.
The SPACE knob controls the Dry/Wet Reverb level for the Left XLR
outputs.
The SPACE knob controls the Dry/Wet Reverb level for the Right XLR
outputs.
Printed on 2020/09/07 17:45