Wireless Connection; Troubleshooting - Two notes Audio Engineering Torpedo Captor X User Manual

2020/09/07 17:45
(wireless connection). The 2 next sections will guide you through the process for the USB and the

wireless connection.

4.1 Torpedo Remote: your gateway to edit all the
parameters inside the Torpedo Captor X
4.1.1 USB connection
Use the supplied USB cable to connect the Torpedo Captor X to your computer.
Connect the micro USB end to the Torpedo Captor X and the other end to your
computer.
4.1.1.1 Setup with your computer
Download Torpedo Remote from the
regards to your OS (Windows or macOS). Once Torpedo Remote is launched, you will be prompted to
register the unit to your account or use it as a Guest (we advise registering the unit, for firmware
updates, etc.). Receive exclusive presets and 3 additional cabinets when you register the Torpedo
Captor X to your account.
When you are in Guest mode you cannot import cabinets from your personal Two notes license to the
Torpedo Captor X. You also cannot remove cabinets from the Torpedo Captor X.
4.1.2 Wireless connection
4.1.2.1 Setup with your phone/tablet
You will connect to the Torpedo Captor X from your mobile device via Bluetooth. The connection has
to be done in the following order:
- Launch the Torpedo Wireless Remote app
- Accept all the requested authorizations (they depend on your tablet or phone)
- The connection window should show up, follow the on screen instructions.
- Input the pin code to pair the Torpedo Captor X and your mobile device. The pin code is a six digit
number starting with 000 and the last three digits are the last 3 numbers of your Captor X's serial
number.

TROUBLESHOOTING:

If after inputting the pin code the Torpedo Captor X does not show up in the "Devices" menu in
Torpedo Wireless Remote, you will need to unpair the Torpedo Captor X in the list of devices that are
paired in the bluetooth menu of your phone. Once you have done this, please redo the procedure
detailed above. You cannot pair the Torpedo Captor X from the phone or tablet OS, it has to be done
by Torpedo Wireless Remote. Some phones need to have the Location (GPS) activated to allow for
Bluetooth pairing. Try activating the Location if you find yourself unable to pair with just the Bluetooth
User's manuals - https://wiki.two-notes.com/
11/36
Torpedo Captor X webage. Choose the appropriate version in
Torpedo Captor X User's Manual