Download  Print this page

Using Your Refrigerator; Setting The Controls; Changing The Control Settings - Whirlpool 3ET18DK Use And Care Manual

No-frost refrigerator-freeze.
Hide thumbs

Advertisement

-.
Using Your Refrigerator
Setting the controls
Controls for the refrigerator and freezer are in
the refrigerator. To adjust a control, turn knob.
When the refrigerator is plugged in for the first
time:
1. Set the refrigerator Control to 4.
2. Set the Freezer Control to C.
Give the refrigerator time to cool down com-
pletely before adding food. (This may take
several hours.)
These settings should be right for normal
household refrigerator usage.
The controls will be set about right when milk
or juice is as cold as you like and when ice
cream
is firm.
Refrigerator Control adjustments
range from
1 to 8. Freezer Control adjustments
range from
Ato D.
Changing the control settings
If you need to adjust temperatures
in refrigerator
or freezer, use the settings listed in the char-l
below as a guide.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SETTINGS:
If Refrigerator
Section is
TOO WARM
Door opened often
Large amount of food added
Room temperature
too warm
Refrigerator
6
Freezer
D
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Refrigerator
4
Freezer
A
If Refrigerator
Section is
TOO COLD
Controls not set correctly
Refrigerator
2
for your conditions
Freezer
A
If ICE isn't
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
Refrigerator
4
Freezer
A
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
6
Freezer
C

Advertisement

Table of Contents

   Also See for Whirlpool 3ET18DK

   Related Manuals for Whirlpool 3ET18DK

This manual is also suitable for:

3et18rk6et18rk

Comments to this Manuals

Symbols: 0
Latest comments: