Setting The Controls; Adjusting Control Settings - Whirlpool 2300253 Use & Care Manual

Bottom-mount refrigerator
Table of Contents

Advertisement

Available languages

Available languages

Setting the Controls

For your convenience, your refrigerator controls are preset at the
factory. When you first install your refrigerator, make sure that the
controls are still preset. The Refrigerator Control and the Freezer
Control should both be at "4" as shown in the illustrations below.
The Refrigerator Control adjusts the refrigerator
compartment temperature and is located on the upper rear
wall in the refrigerator section. Settings to the left of the mid-
setting make the temperature less cold. Settings to the right of
the mid-setting make the temperature colder.
Style 1
Cold
Style 2
REFRIGERATOR
COLDEST
6
FREEZER CONTROL IS
LOCATED IN FREEZER
The Freezer Control adjusts the freezer compartment
temperature and is located at the top left front of the freezer
section. Settings to the left of the mid-setting make the
temperature less cold. Settings to the right of the mid-setting
make the temperature colder.
4
Cold
Give your refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food into
the refrigerator.
IMPORTANT: If you add food before the refrigerator has cooled
completely, your food may spoil. Turning the Refrigerator and
Freezer Controls to a higher (colder) than recommended
setting will not cool the compartments any faster.
10
4
3
5
2
6
7
Coldest
1
7
1
COLD
2
3
5
4
Coldest

Adjusting Control Settings

Give the refrigerator time to cool down completely before adding
food. It is best to wait 24 hours before you put food into the
refrigerator. The settings indicated in the previous section should
be correct for normal household refrigerator usage. The controls
are set correctly when milk or juice is as cold as you like and
when ice cream is firm.
If you need to adjust temperatures in the refrigerator or freezer,
use the settings listed in the chart below as a guide. Always
remember to wait at least 24 hours between adjustments.
CONDITION/REASON:
REFRIGERATOR section
too warm
Door opened often
Large amount of food added
Room temperature very warm
FREEZER section too warm/ice
not made fast enough
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Heavy ice usage
REFRIGERATOR section
too cold
Control not set correctly for your
conditions
FREEZER section too cold
Control not set correctly for your
conditions
RECOMMENDED
ADJUSTMENT:
Turn
REFRIGERATOR
Control to next
higher number,
wait 24 hours,
then re-check
Turn FREEZER
Control to next
higher number,
wait 24 hours,
then re-check
Turn
REFRIGERATOR
Control to next
lower number,
wait 24 hours,
then re-check
Turn FREEZER
Control to next
lower number,
wait 24 hours,
then re-check

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents