Washer Operating Procedure - Haier HWF5300AW User Manual

setting, go to the desired cycle and touch the "Custom Program" button. The washer will
automatically go to the saved setting.
15) Child Lock
for more than 3 seconds, child lock will activate. Push again to cancel the child lock. You
can unlock the child lock function only by pushing this button. Power off, program finish, or
unplugging the power will not unlock the child lock! If the child lock function is activated,
the child lock LED is on; if not, the child lock LED is off.
16) Time Display Zone
(such as 0:45), more than 1 hour but less than 9 hours display as X: YY (such as 3:28),
more than 10 hours, display as XX: YY (such as 13:20).
17) Door Lock LED
the door can open, door lock LED is off. This will prompt the end of a cycle. Too add
a garment touch the Start / Pause button (3). The door lock icon will flicker. Once the
garment is added, close the door and touch the Start / Pause button again. The washer
will resume its operations. You could add a garment during the first 5 minutes only.

Washer Operating Procedure:

1. Lightly touch the On/Off button to power on the washer.
2. Select wash cycle by touching the pad by the cycle. A light will illuminate the cycle
chosen.
3. Once selection is made, the soil level, rinse level, spin speed and the wash/rinse water
temperatures are pre-set. At this point, if you choose not to have any other options, lightly
touch the start/pause button to start the wash cycle.
If you want to change the preset settings before you touch the Start / Pause button.
1. Lightly touch the soil level, rinse level, spin speed and water temperature to select.
2. Any of the supplied options: Delay Start, Prewash, Beeper setting, Extended Spin, Stain
treatment, Rinse & Spin or Custom Program can be now chosen.
3. After option selection, lightly touch the start/pause button to start the wash cycle. (All
options not available in all cycles).
4. To customize your settings, once your favorite settings are selected touch the Custom
Program button and hold for 3 seconds.
5. To child lock the control panel touch the Rinse&/Spin button and hold for 3 seconds. To
unlock the child lock function only touch the Rinse&/Spin button. Power off button cannot
unlock the child lock function. During activation of the child lock function, the child lock
LED is on.
6. During the first five minutes you could pause the washer and the door lock light on the
control panel will flicker. During this time the door of the washer can be opened to Add
a Garment.
7. With the machine in standby, you can chose a delay start time from 1-24 hours. To do
so, touch the delay button. Each touch of this button advances the delay in one hour
increments. To set the delay function touch the Start / Pause (3) button. Doing so will
cause the delay (12) button to flash. When set at 24:00, push the delay button again
and the delay time is cancelled. After setting wash program is change, delay time is
cancelled.program changes, delay time is also cancelled.
English
14