Marker Cards
Marker Cards can be inserted directly without any prior handling. The end with the solid margin must be fed into the
printer.
Processing a Single Marker Card
Place marker card on the conveyor belt (A) in the direction of the arrow.
A
Processing a Stack of Marker Cards
Place the stack of marker cards (A) on the holder.
A
IMPORTANT • Only marker cards are allowed to be inserted in stacks.
• You can insert a stack of up to 30 marker cards in the loader.
• The stack must not contain a mix of full-size and half-size marker cards.
• Insert the stack of marker cards in the loader (A) in the direction of insertion shown previously.
Rockwell Automation Publication 1492-QS005D-EN-P - February 2020
ClearMark Advanced Printer
17