Adding the hard drive (HDD)
Parallel (IDE) hard drive connections are not available on this
computer's main board, so you cannot use parallel (IDE) hard
drives with it.
1
Lie the computer on its side and open the cover.
2
Remove the computer's front cover.
3
Remove the CD drive bracket screws.
(for 400S8A models only)
4
Pull and lift the CD bracket as in the picture to tilt it upward.
5
Remove the screw securing the hard drive bracket and then
push the hard drive bracket as shown below to detach it.
Chapter 4.
79
Settings and Upgrade