Champion 100787 Operator's Manual
  1. Manuals
  2. Brands
  3. Champion Manuals
  4. Pressure Washer
  5. 100787
  6. Operator's manual

Champion 100787 Operator's Manual

3500 psi
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
MODEL #100787
3500 PSI PRESSURE WAShER
REGISTER YOUR PRODUCT ONLINE
at championpowerequipment.com
or visit championpowerequipment.com
SAVE ThESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do
so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
Made in China - REV 20200316
Champion Power Equipment, Inc., Santa Fe Springs, CA USA

Advertisement

Table of Contents
loading

Related Manuals for Champion 100787

Summary of Contents for Champion 100787

  • Page 1 This manual should remain with the product. Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice. Made in China - REV 20200316 Champion Power Equipment, Inc., Santa Fe Springs, CA USA...

  • Page 2: Table Of Contents

    TAbLE Of CONTENTS 100787 - 3500 PSI PRESSURE WAShER TAbLE Of CONTENTS Maintenance ..........Cleaning the Pressure Washer ........

  • Page 3: Introduction

    100787 - 3500 PSI PRESSURE WAShER SAfETY DEfINITIONS INTRODUCTION Congratulations on your purchase of a Champion Power Equipment The purpose of safety symbols is to attract your attention to (CPE) product. CPE designs, builds, and supports all of our possible dangers. The safety symbols, and their explanations, products to strict specifications and guidelines.

  • Page 4: Important Safety Instructions

    IMPORTANT SAfETY INSTRUCTIONS 100787 - 3500 PSI PRESSURE WAShER IMPORTANT SAfETY INSTRUCTIONS WARNING  Spark from removed spark plug wire can result in fire or DANGER  electrical shock. Pressure washer exhaust contains carbon monoxide, a When servicing the pressure washer: colorless, odorless, poisonous gas.
  • Page 5 IMPORTANT SAfETY INSTRUCTIONS 100787 - 3500 PSI PRESSURE WAShER WARNING NOTICE   NEVER spray flammable liquids or use pressure washer in Improper treatment or use of the pressure washer can damage areas containing combustible dust, liquids, or vapor. it, shorten its life and void your warranty.

  • Page 6: Fuel Safety

    IMPORTANT SAfETY INSTRUCTIONS 100787 - 3500 PSI PRESSURE WAShER When adding or removing gasoline: WARNING  – DO NOT light or smoke cigarettes. High pressure spray can splash back at operator or propel – Always turn the pressure washer off and let cool for a objects.

  • Page 7: Safety And Dataplate Labels

    3mm corner radius; 2mm safe margin; to be printed 1110-L-OP-A on WHITE substrate. This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for outside parties without the explicit consent of Champion Power Equipment. 1110-L-OP Colors Operation of this equipment may create sparks that can start fires around...

  • Page 8: Safety Symbols

    IMPORTANT SAfETY INSTRUCTIONS 100787 - 3500 PSI PRESSURE WAShER Safety Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.

  • Page 9: Operation Symbols

    2. Move the fuel valve to the “ON” position. This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for outside parties without the explicit consent of Champion Power Equipment.

  • Page 10: Controls And Features

    CONTROLS AND fEATURES 100787 - 3500 PSI PRESSURE WAShER CONTROLS AND fEATURES Read this operator’s manual before operating your pressure washer. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Pressure Washer 1.

  • Page 11: Parts Included

    CONTROLS AND fEATURES 100787 - 3500 PSI PRESSURE WAShER Parts Included Part Part Qty. Hardware Hardware Qty Tools Needed Wheel cap Pin roll Wheels R-Pin Ø2 × 33 Flange bolt M8 × 45 2x 12mm wrench or Support Leg socket...

  • Page 12: Assembly

    ASSEMbLY 100787 - 3500 PSI PRESSURE WAShER ASSEMbLY Support Legs 1. Attach the supports legs to the pressure washer frame with Your pressure washer requires some assembly. This unit ships 2 M8 x 45 flange bolts and 2 M8 flange lock nuts per leg.

  • Page 13: High Pressure Hose Strap

    ASSEMbLY 100787 - 3500 PSI PRESSURE WAShER Trigger Gun Holder Nozzles 1. Align the trigger gun holder to the frame. 1. Nozzles are stored in the top panel. To store the nozzle, press it into the corresponding opening. To remove the nozzle, just 2.

  • Page 14: Attach The Trigger Gun Assembly

    ASSEMbLY 100787 - 3500 PSI PRESSURE WAShER Attach the Trigger Gun Assembly 1. Attach the spray wand to the trigger gun. 2. Rotate (clockwise) the M22 coupler on the trigger gun until the spray wand is secure. Do not overtighten.

  • Page 15: Install The Vented Oil Cap

    OPERATION 100787 - 3500 PSI PRESSURE WAShER OPERATION NOTICE  Do not run the pressure washer without water supply Pressure Washer Location connected and turned on, as this may damage the high This pressure washer must have at least 5 ft. (1.5 m) of clearance pressure seals and decrease pump life.

  • Page 16: Distance From Cleaning Surface

    OPERATION 100787 - 3500 PSI PRESSURE WAShER Distance from Cleaning Surface The distance between the spray nozzle and the cleaning surface is another factor that affects the impact force of the water. The impact force of the water increases as the nozzle is moved closer to the surface. You can vary the impact force by controlling –...

  • Page 17: High Pressure Wash

    OPERATION 100787 - 3500 PSI PRESSURE WAShER high Pressure Wash NOTICE  CAUTION Use only detergents designed for pressure washers.  Do not use household detergents, acids, alkalines, bleaches, Always engage the trigger safety latch when the unit is not in solvents, flammable material, or industrial grade solutions, use.

  • Page 18: System Flush

    OPERATION 100787 - 3500 PSI PRESSURE WAShER 4. Connect the other end of the detergent suction hose to the To reduce the risk of bodily injury or property damage, always detergent barb on the pump. follow this procedure whenever spraying is stopped, when work is completed, and before checking or repairing any part of the system.

  • Page 19: Stopping The Engine

    MAINTENANCE 100787 - 3500 PSI PRESSURE WAShER Stopping the Engine Cleaning the Pressure Washer 1. After stopping the engine per Honda’s owner/operator CAUTION  manual, depressurize system. DO NOT spray the pressure washer with water. 2. Turn off water supply and disconnect all hoses.

  • Page 20: Storage

    STORAGE 100787 - 3500 PSI PRESSURE WAShER STORAGE SPECIfICATIONS Refer to the Maintenance section for proper cleaning instructions. Pressure Washer Specifications Pressure Washer Storage Model ............100787 Max Pressure ..........3500 PSI 1. Allow the pressure washer to cool completely before storage.

  • Page 21: Parts Diagram

    SPECIfICATIONS 100787 - 3500 PSI PRESSURE WAShER Parts Diagram...

  • Page 22: Parts List

    SPECIfICATIONS 100787 - 3500 PSI PRESSURE WAShER Parts List Part Number Description Qty. Part Number Description Qty. GX200UT2-QX2 NH1 Engine, 196cc 26 255.250100.05 High-Pressure Hose, 50ft. 27 252.201300.00 2.14.001 Key, SQ 4.78 × 4.78 × 40 O Ring, Ø17.1 × Ø11.8 ×...

  • Page 23: Troubleshooting

    TROUbLEShOOTING 100787 - 3500 PSI PRESSURE WAShER TROUbLEShOOTING Problem Cause Solution No fuel. Add fuel. Pressure washer will not start. Faulty spark plug. Replace spark plug. Fill crankcase to the proper level. Place Pressure washer will not start; Low oil level.

  • Page 24: Warranty

    To complete registration you will need to include a copy of the – Problems caused by parts that are not original Champion purchase receipt as proof of original purchase. Proof of purchase Power Equipment parts.

Table of Contents