Advertisement
© Panduit Corp. 2018
•
An incomplete crimp can cause a fire.
•
Use proper compression connector and cable combinations. Improper combinations can result in
an incomplete crimp.
•
The relief valve will sound to indicate a completed crimp. If you do not hear the sound of the relief
valve, the crimp is not complete.
•
Inspect tool before use. A worn or damaged tool may result in breakage striking the operator or
nearby personnel.
•
Do not perform any service or maintenance other than as described in this manual.
Injury or damage to the tool may result.
•
Do not place the tool in a vise. The tool is designed for hand-held operation.
•
Protect the tool from rain and moisture.
•
Use this tool for the manufacturer's intended purpose only.
•
Keep the tool head portion clean and free from debris. Excessive dirt and grit can contribute to the
premature wear of the tool's internal mechanical parts. When not using the tool, regularly check
that no foreign matter or debris exists in the open areas between the indenters in the tool head.
•
Soap and a damp cloth should be used to clean the tool body.
•
Always store the tool in its clean, dry carrying case when not in use.
•
DO NOT press trigger and release button simultaneously. Damage to trigger linkage may result.
•
Always point tool away from others.
•
If the tool is kept in cold temperatures below 23
return the tool to room temperature for 1 hour before using.
•
Avoid dropping the tool. Extreme shock may damage the hydraulic circuit and result in malfunction
of the tool.
•
Always verify the proper size compression connector for the conductor, by checking the color code
and the printing on the compression connector.
CT-2002CH: PA29258A01_00
OPERATION MANUAL
WARNING
CAUTION
IMPORTANT INFORMATION
o
o
F/-5
C for any extended time, it is advisable to
Page: 3 of 6
CT-2002CH
6-2018
Advertisement
