Advertisement
INTRODUCTION
Thank you for purchasing the CMDX Commander from Dakota Digital. This, along with
many other products that Dakota Digital has to offer, represent the latest in electronics
technology for your street rod, classic car, truck, or custom vehicle.
The CMDX package includes:
• Receiver/controller
• 2 key chain style transmitters
• 2 dual relay packs
• 2 single relay packs
The CMDX can control nearly any configuration of auxiliary outputs through use of the
provided external relays. The CMDX has a total of twelve outputs that can be programmed for a
momentary-on or latch-on and latch-off. Common applications include: power windows, electric
door locks, power trunk, electric tonneau covers, tilt front ends, moon roof control, and other lights
or motors.
A safety feature partially disables the system when the ignition is on to avoid the accidental
opening of a door, or some other undesired function, during vehicle operation. With the ignition
on, the only functions that are allowed to work are outputs 1A, 1B, 2A, and 2B. The ignition will
disable all other outputs, and keep latched outputs at their current state, on or off.
ADDITIONAL TRANSMITTERS
The transmitters supplied with your remote system have a unique serial number coded into
each one for security. Each unit can "learn" up to 7 transmitters. Lost or stolen transmitters are
easily erased by simply reprogramming the remaining transmitters into the system again.
Transmitters from other manufacturers, such as car alarm systems, will not work with the CMDX.
RADIO FREQUENCY INTERFERENCE STATEMENT
This device complies with part 15 of FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
FCC IDENTIFIER: KNF6TX
3
Advertisement
