APRI FBSN-8TRF Manual page 6

System consists of following parts
• Display unit (6) with LCD display, containing microcontroller driving the system and wireless communication interface.
• 4 front sensors (1) (marked with green color) are installed in the front bumper.
• 4 rear sensors [2 central (2) marked with black color, 2 corner (3) marked with blue color] are installed in the rear
bumper.
• Optional 4 TPM sensors (26).
• Electronic control unit (ECU) driving front sensors (4) with communication interface, inside a splash proof box.
• Electronic control unit (ECU) driving rear sensors (7) with communication interface, inside a splash proof box.
• Front cable harness (5).
• Rear cable harness (8).
• Display unit holder (20)
• Display unit power cord (21).
Rem.: system variability – system can work with various configurations of parking sensors:
- only 2 rear sensors (central)
- 4 rear sensors
- only 2 front sensors (corner)
- 4 front sensors
- 2 front and 2 rear sensors
- 2 front and 4 rear sensors
- 4 front and 4 rear sensors
- only 2 rear sensors (central) and 4 tire pressure sensors TS3
- 4 rear sensors and 4 tire pressure sensors TS3
- only 2 front sensors (corner) and 4 tire pressure sensors TS3
- 4 front sensors and 4 tire pressure sensors TS3
- 2 front and 2 rear sensors and 4 tire pressure sensors TS3
- 2 front and 4 rear sensors and 4 tire pressure sensors TS3
- 4 front and 4 rear sensors and 4 tire pressure sensors TS3
! Repeat learning procedure in case of sensors configuration change!
Electronic parking system FBSN-8TRF