Digital Electronics Corporation PL-FD210 Installation Manual

Installation Guide
The PL-FD210 (FDD Unit) is an internally mounted 3.5 inch floppy disc drive
unit, designed for use with Proface's Panel Computer, hereafter referred to as
the "PL."
Corresponding PL unit: PL-X900 Series Units(4Slot type), PL-X920 Series Units
All product names used in this document are the trademarks of their respective
manufacturers.
Pro-face: Digital Electronics Corporation
! ! ! ! !
• Be sure to confirm that the PL unit's power cord is disconnected prior to
installing PL-FD210, in order to prevent electrical shock.
• Do not attempt to modify the PL-FD210, due to the danger of fire or electrical
shock.
• Prior to installing the PL-FD210, be sure to read this Installations Guides' "2.
Installation" section completely to insure that this unit is correctly installed.
To Prevent Accidents
• Since the PL-FD210 is a precision instrument, be sure that it is neither hit by nor
pressed strongly against another object.
• Be sure that water, liquids, or metal particles are not allowed to contact or enter
this unit. Either of these may cause either a breakdown or an electrical shock.
• Do not install or operate this unit in a location where there is direct sunlight,
excessive heat, dust or vibration.
• Do not store or operate this unit near chemicals, or where there are chemical
fumes.
• Do not use the PL-FD210 in locations where corrosive gasses are present.
• To prevent damage to file data, be sure to shut down the unit's OS before turning
OFF the main power.
PL-FD210
(4-Slot type)
Warning - Safety Precautions
-1-