Table of Contents
Advertisement
CARING FOR YOUR RANGE
S
EALED SURFACE BURNERS AND COOKTOP
Cleaning the surface burners
•
You should routinely remove and clean the
burner cap. Always clean the burner cap after
a spillover. Keeping the burner cap clean pre-
vents improper ignition and an uneven flame.
•
For the proper flow of gas and ignition of the
burner, do not allow spills, food, cleaning
agents, or any other material to enter the
gas tube opening or burner ports.
•
Gas must flow freely through the gas tube
opening for the burner to light properly. You
must keep this area free of any soil and protect
it from boilovers or spillovers. Always keep the
burner cap in place whenever a surface burner
is in use.
•
Let the cooktop cool before cleaning.
•
Do not use oven cleaners, bleach, or rust
removers.
•
Do not obstruct the flow of combustion and
ventilation air.
•
Be careful not to allow moisture to collect in
the burner control knob areas. Moisture can
cause the ignitor switches to fail.
wWARNING
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack,
or convulsions.
.
CONT
(
)
Porcelain
burner cap
Burner
base
•
Occasionally check the burner flames for proper
"
5
8
CARING FOR YOUR RANGE
Contoured
well area
Ignitor
Gas tube
opening
size and shape as
shown. A good flame
is blue in color. If the
flames are uneven,
you may need to clean
the burner ports.
21
Advertisement
Table of Contents
