L
IGHTING STANDING PILOTS
To light the oven burner pilot:
1.
Make sure the oven temperature control knob is
2.
Open the broiler door.
3.
Remove the broiler pan and grid.
.
CONT
(
)
turned off.
4.
Hold a lit match over the oven burner pilot located
5.
After the oven burner pilot is burning steadily,
6.
Replace the broiler pan and grid and close
USING YOUR RANGE
at the rear of the burner.
NOTE: To make it easier
to reach the pilot, use a
long (fireplace) match.
check the burner
lighting by turning the
oven temperature control
knob to a temperature at
or above 250°F. The
burner will take 50-60
seconds to light.
the door.
7