Whirlpool SF3000SG Use & Care Manual page 21

R
EMOVING THE OVEN BOTTOM
You can remove the panel in the oven bottom
for cleaning.
To remove:
1.
Let oven cool.
2.
Remove the oven racks.
3.
Remove the 2 hold-down screws at the rear of
the oven. If the screws are too tight to remove by
hand, use a screwdriver.
4. Place your fingers in the slots in the bottom
panel and lift the rear of the panel up and back
until the lip at the front of the panel is clear of the
front frame of the oven cavity.
5.
Lift the bottom up and out.
To replace:
Reverse the steps above.
CARING FOR YOUR RANGE
Remove
Lip
21