Syncing - Infinite Peripherals INFINEA TAB Series User Manual

!

SYNCING

The Infinea TAB portable barcode scanner and card reader is designed
specifically for use with iPad there by allowing the iPad to sync with iTunes
through the Infinea TAB while connected.
To sync iPad with iTunes through the Infinea TAB follow the steps below;
1. Connect the Infinea TAB to a computer using a Mini USB cable as
shown in the figure below.
2. Wait for the sync mode beep and the LED flashes blue.
The Infinea TAB should now be in sync mode. Refer to the iTunes
documentation for syncing your iPad.
!
!
!
!
!
!
!
Tips:
When debugging your Infinea TAB iOS application keeping the sync-cable
connected to the Infinea TAB will help to speed up your developing efforts by
allowing you to sync your application onto the iOS device connected to the
Infinea TAB.!
!
!
Figure 11
*&!
USER MANUAL |