Table of Contents
Advertisement
OPTIONAL RACK MOUNTING KITS
The optional J-RAK™ rackmount adapters allow four or eight LX-2s to be securely housed in a standard 19" equipment rack.
The J-RAK fits any standard-sized Radial DI or splitter, allowing you to mix and match as needed. Both J-RAK models are built
of 14-gauge steel with a baked enamel finish.
J-Rak 8
J-Rak 4
Each direct box can be front or rear mounted allowing the system designer to have the XLR's on the front of the rack or rear,
depending on the application.
J-CLAMP
The optional J-CLAMP™ can mount a single LX-2 inside a
road case, under a table, or on virtually any surface. Con-
structed from 14-gauge steel with a baked enamel finish.
6
Radial Engineering Ltd.
LX-2™ Line Splitter User Guide
Advertisement
Table of Contents
