Table of Contents
Advertisement
fEATURES
1.
XLR/TRS INPUT: Combination XLR or ¼" input.
2.
TRIM ON: Set & forget switch activates the trim level
control. Signal passes through at unity gain when this
switch is not engaged.
3.
TRIM LEVEL: Attenuates the signal at the input of the
LX-2.
4.
BOOK END DESIGN: Creates a protective zone around
the jacks and switches.
5.
ISO OUTPUT: Transformer isolated output eliminates
hum & buzz caused by ground loops.
6.
GROUND LIfTS: Disconnects pin-1 ground at the XLR
output and thru.
7.
DIRECT THRU OUTPUT: Direct output to connect to
recording or monitor systems.
8.
NO SLIP PAD: Provides electrical & mechanical isolation
and keeps the unit from sliding around.
Radial Engineering Ltd.
1
4
5
2
2
3
6
7
8
LX-2™ Line Splitter User Guide
Advertisement
Table of Contents
