Audible Signals - Whirlpool RS696PXE Use And Care Manual

4. Turn off Minute Timer.
To cancel the Minute Timer:
Press Timer Off pad.
Disabling the timer
reminder tones:
NOTE: To disable the reminder tones,
press and hold the Timer Set pad for
5 seconds. To enable the tones, follow
the same step. After disabling or enabling
reminder tones, a single tone will sound
and the display will return to the Minute
Timer countdown or the time of day display.

Audible signals

Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
To shut off all signals except for error
tones and the hidden function signal:
Press and hold the Stop Time pad for
5 seconds. A short tone will sound
to tell you the signals have been
STOP
changed. Repeat the above step
TIME
to turn the signals back on.
U SIN G YO U R RAN G E
PRESS YOU SEE
TIMER
OFF
(time of day)
PRESS YOU SEE
TIMER
OFF
(time of day)
To choose between high and low
volume signals:
Press and hold the Delay Start Time pad for
5 seconds. A short tone will sound
to tell you the signals have been
DELAY
changed. "HI" or "LO" will appear
START
on the time display to show the
TIME
volume you chose. If the volume
is changed while the audible signals are off,
when signals are turned back on they will be
at the volume setting chosen.
17