NComputing MX100S Quick Installation Manual

4

Connect MX100 devices

c
USB cables must be connected as illustrated below.
5

Configure MX100 devices

Note: To return to this set up screen,
log out of all MX100-Satellite
devices and press F5 at the
NComputing splash screen.
6

Register your MX100S 3-user kit

a
Go to www.ncomputing.com/MX100/register to register
your new NComputing MX100S 3-User Kit and learn
about the benefits that come with registering your new
product.
Icon
Cable Type
Maximum Distance
1. Connect the RJ45 port on the main (large)
2. Connect two small clients to sides of large
1. Configure "Connection Settings."
A. Autoconnect (optional - connect to
preset host/group) or
B. Select from list (default - user selects
host/group from list).
6
Register and activate your vSpace
b
USB Direct Connect
A/B USB 2.0
5 Meters
unit to LAN or Ethernet switch (should be
on 1Gb LAN) using Cat 5e or Cat 6 cable
(maximum length 100m).
client using the included 2m A/B USB cables
(USB 5 meter limit)
2. Configure "Login Settings."
Select resolution and color depth.
® Server
Must register within 30 days
MX100S
(MX100-Primary / MX100-Satellite)
3-User Kit/Standard Edition

Quick installation guide

Note: Read the vSpace End-user License Agreement during installation for
Microsoft operating system licensing requirements. For multiuser
applications Microsoft Windows Server and client access licenses are
required (see: www.ncomputing.com/mslicensing).
MX100-Primary / MX100-Satellite
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
© Copyright 2016 NComputing Co., Ltd. All rights reserved.
Other trademarks and trade names are the property of their respective owners.
desktop virtualization software
Part No. 162-0053 Rev.A