Bakeware; Meat Thermometer; Oven Door Vent; Baking And Roasting - Whirlpool RS610PXG Use & Care Manual

Bakeware

The bakeware material affects cooking results. Follow
manufacturer's recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
BAKEWARE/ RECOMMENDATIONS
RESULTS
Light colored Use temperature and time
aluminum recommended in recipe.
Light golden
crusts
Even browning
Dark aluminum May need to reduce baking
and other temperatures 25°F (15°C).
bakeware with
Use suggested baking time.
dark, dull and/or
non-stick finish For pies, breads and casseroles, use
temperature recommended in
Brown, crisp
recipe.
crusts
Place rack in center of oven.
Insulated cookie Place in the bottom third of oven.
sheets or baking
May need to increase baking time.
pans
Little or no
bottom
browning
Stainless steel May need to increase baking time.
Light, golden
crusts
Uneven
browning
Stoneware Follow manufacturer's instructions.
Crisp crusts
Ovenproof May need to reduce baking
glassware, temperatures 25°F (15°C).
ceramic glass or
ceramic
Brown, crisp
crusts

Meat Thermometer

On models without a temperature probe, always rely on a meat
thermometer to determine doneness of meat and poultry. The
internal temperature, not appearance, is what counts. A meat
thermometer is not supplied with this appliance.
Insert the thermometer into the center of the thickest portion
of the meat or inner thigh or breast of poultry. The tip of the
thermometer should not touch fat, bone or gristle.
After reading the thermometer once, push it into the meat
in. (1.25 cm) more and read again. If the temperature
drops, cook the meat or poultry longer.
Check all meat in two or three places.
12

Oven Door Vent

1
1. Oven door vent
Hot air and moisture escape from the oven door vent during
certain oven modes. Some condensation may occur, however
this will not affect cooking performance.

Baking and Roasting

®
ACCUBAKE Temperature Management System
(on some models)
The ACCUBAKE system electronically regulates the oven heat
levels during preheat and bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements
cycle on and off in intervals. The bake element will glow red when
cycling on, the broil element will not. This feature is automatically
activated when the oven is in use.
Before baking and roasting, position racks according to the
"Positioning Racks and Bakeware" section. When roasting, it is
not necessary to wait for the oven preheat conditioning time to
end before putting food in unless recommended in the recipe.
To Bake or Roast:
1. Press BAKE.
Press TEMP "up" or "down" arrow pads to set a temperature
other than 350°F (177°C) in 5° amounts. The bake range can
be set between 170°F and 500°F (77°C and 260°C).
2. Press START.
The temperature can be changed after this step.
START does not need to be pressed again.
3. Press OFF when finished.
Preheating
After START is pressed, the oven will enter a timed preheat
conditioning. "PrE" and the time countdown will appear on the
display. When the preheat conditioning time ends, a tone will
sound and the selected temperature will appear on the display.
Preheat temperatures are affected by varying factors such as
room temperature and peak energy usage times. It is normal for
the temperature showing on the display and the actual oven
temperature to differ.
Waiting an additional 10 minutes after the preheat conditioning
time ends to put food in the oven is suggested when baking
foods with leavening ingredients, such as yeast, baking powder,
baking soda and eggs.