Fbs-W2C Wi-Fi Communication Module Product Introduction; Summary; Product Function List - FATEK FBs-W2C User Manual

Chapter1. FBs-W2C Wi-Fi Communication Module
Product Introduction

1.1 Summary

FBs-W2C is a Wi-Fi board plugged in the PLC, which enables wireless network
transmission capability. In addition, as a wireless communication module, it
supports Wi-Fi Station mode (STA mode) and needs to connect to router. In
order to make the W2C settings easier and more convenient, the Smart Config
function is provided to allow users to easily connect to the router via the mobile
app. This module breaks the traditional PLC only through wired transmission,
and the use is no longer subject to the physical network route. It can make
multiple PLCs establish connections through one AP at the same time. It is
superior to the traditional wired way in turns of maintenance.

1.2 Product Function List

Function
Wi-Fi connection
FATEK Standard
Communication Service
SNTP
Firmware Update
FATEK Standard Search
Service
Table 1: W2C Function List
Description
Connect with router, wireless network
transmission.
Communicate with any of the FATEK standards and
communicate with devices that exist on the same
local area network.
Support SNTP
Firmware update using OTA (via wireless network).
Users can use the W2C Configurator (FATEK
Standard Search Service Communication
Software) to search for W2C and other FATEK
devices in the same local area network, check
their operating status and set related
configuration to control.
FBs-W2C User Manual
1