Fatek Standard Communication Service - FATEK FBs-W2C User Manual

Chapter3. FATEK Standard Communication Service
PLC has wireless network communication capability by plugging FBs-W2C Wi-Fi
communication module. It can communicate with objects such as WinProladder
that use FATEK standard communication in the same local area network.
Supporting IPv4 and TCP/UDP protocols, can up to 4 TCP connections at the
same time. Default port of TCP/UDP are 500, it can be modified by PLC register,
shown as Table 7.
LED
TCP Port
UDP Port
In order to ensure the successful exchange of communication data in a wireless
environment, it is recommended to set the Time out and Retry as follow:

Time out : 3 sec

Retry : 5 times
WinProladder setting method can refer to Figure 9
Figure 9: Communication Service setting for WinProladder
Table 7: TCP/UDP Port PLC Register Config
FBs-W2C User Manual
PLC register config
R946
R947
10