Whirlpool RS600BXV Use & Care Manual page 7

Using the Oven Controls
Baking
1.
Position the rack properly
before
turning on the oven. To
change rack position,
lift rack at
front and pull out.
I
I
2. Set the Oven Selector to BAKE.
4. Put food in the oven.
NOTE: Oven
rack, walls and door will be hot.
During baking, the elements will
turn on and off to keep the oven
temperature at the setting. The
Oven Signal Light will turn on and
off with the elements.
The top element helps heat
during baking, but does not
turn red.
The rack should be placed so the
top of the food will be centered in
the oven. Always leave at least IYz to
2 inches (4-5 cm] between the sides
of the pan and the oven walls and
other pans. For more information,
see the Cooking Guide.
3. Set the Oven Temperature Control
to the baking temperature you
want. The Oven Signal Light will
come on. The oven is preheated
when the Oven Signal Light first
goes off.
5. When baking is done, turn
both
the Oven Selector and Oven
Temperature Control to OFF