Advertisement
ULTRASONIC MINI-WELDER
ONPAK_Gen3.0
- Instruction Manual -
&
W arning : For your safety, read this instruction manual
thoroughly and have a good understanding of
&
its contents.
W arning : K eep this instruction manual in a handy place
close from the machine so that you can read the
manual as necessary.
Advertisement
Table of Contents
Related Manuals for Sealer Sales OnPak Gen 3.0
Summary of Contents for Sealer Sales OnPak Gen 3.0
- Page 1 ULTRASONIC MINI-WELDER ONPAK_Gen3.0 - Instruction Manual - & W arning : For your safety, read this instruction manual thoroughly and have a good understanding of & its contents. W arning : K eep this instruction manual in a handy place close from the machine so that you can read the manual as necessary.
- Page 2 For Your Safet Contents Thank you for purchasing our product. 1. Safety Precaution (Always Read) ■ For your safety, read this instruction manual thoroughly 2. Specification List • Parts Names and have a good understanding of its contents. ■ Keep this instruction manual in a safety place so that 3.
- Page 3 1. Safet Precaution (Alwa s Read) &warning Never allow water to come in direct contact with the unit. ® The "Safety Precautions" explains extremely important In addition, never install the unit in a location where it will precautions that must be taken to prevent injury to the be exposed to water.
- Page 4 &caution &caution Never touch the horn while it is oscillating or immediately after Never expose the handset or main unit to strong impact, use. such as dropping it. * Failure to follow this precaution could result in burns or * Failure to follow these precautions may cause the unit to fail. other injuries.
- Page 5 2. S ecification List 3. Em t O eration Prevention Main Unit OnPak_Gen3.0 has a device that prevents it from being operated Oscillation Frequency 57kHz Maximum Output when empty. This device stops the operation of the unit when the 40VA Maximum power consumption oov�...
- Page 7 6. Before Re uestin Service 7. Maintenance Clean the tip if a horn and the welding fittings often. Please check the following if you have any issues with the unit. Before cleaning, make sure that the power source is turned off. Symptom Check Point Solution...
- Page 8 Warrant 8. After-Sales Service +Limitation of Warranty •within warranty period, Thank you for purchasing our product. we do not cover if any of the following failures occurs Please read the instruction manual completely and carefully and *Failures which result from misuse and/or not follow the instructions.
Need help?
Do you have a question about the OnPak Gen 3.0 and is the answer not in the manual?
Questions and answers