Table of Contents
Advertisement
Pressing the PTT button will mute the panel speaker and activates the panel
microphone for as long as the button is depressed. Pressing the PTT button
also mutes all the diver microphones.
Panel Mic: The Panel Mic is normally deactivated. Pressing the PTT
button will activate the Microphone. The Panel Mic LED will confirm the
microphone is active. Communication should be clear as long as the Tender
is a foot or less away from the panel microphone.
REM Jack: When using the Remote jack, pressing the headset PTT button
mutes the panel mounted speaker, allowing the tender to more clearly hear
the divers. WARNING: pressing the push-to-talk button could shock the
divers in the event that the diver microphone mounting screws are in direct
contact with the diver's mouth. Ensure that the microphone is placed away
from the Diver's mouth or the screws are insulated with a rubber boot.
Topside headset Microphone and Earphone Jacks: Used to connect the
Tender earphone and/or microphone to the MK-III.
Line In: The line in jack allows the Tender to connect an RCA cable from
an external audio source to MK-III. It also allows "daisy chaining" MK-IIIs
and / or playing music from a player to the divers.
Line Out: The Line Out jack allows the Tender to connect an RCA cable
from the MK-III to an external device such as an audio recorder or for
"daisy chaining" MK-IIIs together.
AUX: The aux jack can be used to connect optional accessories and to
connect an audio player of your choice. The initial audio level of the player
must be set on the player itself, then can be adjusted for each diver by using
the MK-III's panel controls.
4.1.3
DIVER CONTROLS
Diver Microphone Volume: Allows the tender to control the microphone
volume from each diver.
15
506279-000
REV. A
Advertisement
Table of Contents
