Advertisement
The case can then be removed from the recorder, complete with back panel by sliding backwards.
To fit the new portable case, carefully slide it on from the rear of the recorder. Ensure the case is orientated with the
handle on the top of the recorder.
Slide the case fully forward ensuring that no internal cables get trapped between the case and front bezel.
The case should sit flat on the back of the front bezel.
Re-fit the four M3 screws in the sides of the case.
Remove the rear panel from the old case by removing the two M3 screws that hold it in place.
43-TV-33-62 iss.1 GLO Oct 06 UK
Fig 7
Remove the 2
screws on each side
of the case
Fig 8
Re-fit the 4
screws in the
portable case
5
Advertisement
