Setting The Clock - Whirlpool RM988PXL Use & Care Manual

DIGITAL DISPLAY /CLOCK
-
it shows you what number pads you
touched
NUMBER PADS
tells the oven you are going to cook at less
than full power.
-START tells the oven to start.
-DEFROST tells the oven to run at 30% of full
A Signal Light
comesion every
time you touch a
Command Pad.
While the oven is
running, the Signal
Light or lights will
be on to show you
what the oven is
doing.
SETTINGIHECLOCK
Wher; the range IS first plugged in, the Clock/ Display shows 88:88. If the electric
power ever goes off, the Clock/ Display will also show all 8's when the power comes
hack c?
You ( an cook or use the Minute Timer without setting the clock, but the display will be
blank after cooking. The oven door must be closed before setting the clock.
DO THIS... THIS HAPPENS . . .
q .
I. Touch CLOCK.
The word "seP'will glow on the display. Start
touching number pads for the desired time
within 5 seconds.
The Display will show what numbers you
m This example shows 3:25.
touched In the order you touched them.
2. Touch number pads for
the correct tlme of day.
. q
3.
Touch START.
The START Signal Light will come on to show
that you have touched START. It will go off
In aboLlt 5 seconds. The clock is set.
5