Whirlpool RFOIOEXR Use & Care Manual page 9

3. Pull the surface unit straiaht awav
from the receptacle. e
'
4.
Litt out the reflector bowl. See
Cleaning Chart on page 18 for
cleaning instructions.
Replacing
.
Line up opening in the reflector
bowl with the surface unit
receptacle.
I
1
3. Hold the surface unit as level as
possible with the terminal just
started into the receptacle.
4. Push the surface unit terminal into
the receptacle. When the terminal
is pushed into the receptacle as
far as it will go, the surface unit will
fit into the reflector bowl.
9