Configuration Tab - HMS Networks intesis ASCII Server KNX User Manual

ASCII Server – KNX
TM
Intesis

5.2.3 Configuration tab

Select the Configuration tab to configure the connection parameters. Three subsets of information are shown in this
window: General (Gateway general parameters), ASCII (ASCII interface configuration) and KNX (KNX TP-1 interface
configuration).
General parameters are explained in Intesis MAPS user manual for Intesis ASCII Server Series.
5.2.3.1 ASCII Configuration
Set the parameters for connection to ASCII device.
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Figure 5.2 Intesis MAPS configuration tab
Figure 5.3 Intesis MAPS configuration tab for ASCII Server
User Manual r1.4 EN
URL https://www.intesis.com
14 / 20