Bosch EXACT 2 Original Instructions Manual page 17

ample, the power tool may move violently and uncontrol-
lably.
Do not use the power tool as a drill. Power tools with a
u
shut-off clutch are not suitable for drilling. The clutch can
shut off automatically and without warning.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for tightening and loosening
screws, bolts, nuts and other threaded connectors in the
specified power and dimension ranges.
The power tool is not intended for drilling; in order to pre-
vent personal injury and damage to property, power tools
with a shut-off clutch should never be used for drilling.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) LED indicator for screwdriving applications
(2) Battery charge LED indicator
Technical data
EXACT industrial cordless screwdriver
Article number
Max. torque, hard/soft screwdriving application accord-
ing to ISO 5393
No-load speed n
0
Rated voltage
Direction of rotation
Weight according to EPTA-Procedure 01:2014
Protection rating
EXACT industrial cordless screwdriver
Article number
Max. torque, hard/soft screwdriving application accord-
ing to ISO 5393
No-load speed n
0
Rated voltage
Direction of rotation
Weight according to EPTA-Procedure 01:2014
Protection rating
Bosch Power Tools
(3) Rotational direction switch
A)
(4) Battery release button
(5) Battery with APT contact
(6) On/off switch
(7) Marking ring
(8) Tool holder
(9) Application tool (e.g. screwdriver bit)
(10) Slider for preselecting the torque
A)
(11) Charger
A)
(12) Mains plug
(13) Green LED indicator on the charger
(14) Red LED indicator on the charger
(15) Connection socket for a voltage adapter on the 4EX-
A)
ACT
A)
(16) D-Sub connector plug
(17) Screws on the D-Sub connector plug
(18) Voltage adapter
A)
(19) Quick-change chuck
(20) Worklight
(21) Adjustment tool
(22) Setting disc
(23) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
2
0 602 490 433 0 602 490 437
Nm 2/2
-1
min 600
V 9.6
kg 0.82
IP 20
7
0 602 490 439 0 602 490 443
Nm 7/7
-1
min 150
V 9.6
kg 0.87
IP 20
English | 17
A)
A)
A)
A)
4 6
0 602 490 431
4/4 6/6
900 600
9.6 9.6
0.83 0.83
IP 20 IP 20
8 9
0 602 490 435
8/8 9/9
680 350
12.0 9.6
0.87 0.83
IP 20 IP 20
1 609 92A 4V3 | (14.02.2019)