Using The Self-Cleaning Cycle - Whirlpool RF385PXG Use & Care Manual

USING THE SELF-CLEANING CYCLE

S
ETTING THE CONTROLS
NOTE: Make sure the clock is set to the correct
time of day. (See "Setting the clock" in the "Using
Your Range" section.)
1.
Press AUTO CLEAN.
This will automatically set a 3
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1 ⁄ hour before the cycle is over.
2
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3 ⁄
1
pads to set the cleaning time you want. Press
the "up" (s) or "down" (t) pad(s) until a time
between 2 ⁄ -4
1 1
2
•
Use 2 1 ⁄ hours for light soil.
2
•
Use 3 1 ⁄ -4 1 ⁄ hours for average to heavy soil.
2 2
3.
Start the oven.
The door will lock as soon as you press
START/ENTER.
4.
After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
LOCK'D goes off and the door unlocks.
5.
After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or sponge.
If needed, touch up spots with a mildly abrasive
cleanser or cleaning sponge.
26
1 ⁄ -hour
2
hours, use the hour and minute
2
⁄ hours shows on the display.
2
PRESS YOU SEE
AUTO
CLEAN
PRESS YOU SEE
HR MIN
(example shows 4
cleaning time)
PRESS YOU SEE
START
ENTER
HEAT
5 SEC
YOU SEE
CLEAN TIME
CLEAN TIME
1 ⁄ -hour
2
ON
LOCK'D CLEAN TIME
CLEAN