188 Maintenance
13. To disconnect the drive module from the LCL filter module:
•
(13a) Remove the shroud.
•
(13b) Remove the bolts that connect the power busbars.
•
(13c) Remove the attaching bolt.
•
(13d) Remove the shroud.
•
(13e) Remove the bolts.
•
(13f) Disconnect the power wire of the LCL filter fan from connector FAN3:LCL.
14. To open the support legs 90 degrees, press each leg a little down and turn it aside.
15. To remove the lower support bracket of the drive module, undo the two screws.