Advertisement
Instructions for operation
◆ Visitor call from door camera
Visitor presses Call
Monitor speaker rings the
button, and call is
calling sound, and monitor
forwarded to monitor.
displays the visitor
(View time : 30 second).
◆ To monitor outside of the door using monitor screen
Press [Door/Interphone] button
to display door camera to screen
(View time : 1 minute).
◆ To monitor the lobby using monitor screen :
Press and hold [Guard/Lobby] button for 2 seconds to see lobby image (Image/Incoming voice : 8 second)
◆ When visitor calls from lobby
Visitor calls the
Monitor speaker rings the
house to visit by
calling sound, and monitor
pressing the house
displays the visitor
number from lobby.
(View time : 30 second).
◆ When call comes from Guard Room
Guard Room calls
the house by pressing
the house number.
10
Press [Talk/Menu] button
Call is completed when pressing
and the call is connected
[Talk/Menu] button
(Talking time : 3 minute).
time. Pressing [Door Open] button
will open the door and the call
is automatically completed after
5 second.
Press [Talk/Menu] button
Call is completed when pressing [Talk/Menu]
and the call is connected.
button
one more time. Pressing [Door Open]
(Talking time : 3 minute)
button
will open the door and the call is
automatically completed after 5 second.
Press [Talk/Menu] button
Call is completed when pressing
and the call is connected
[Talk/Menu] button
(Talking time : 3 minute).
time. Pressing [Door Open] button
will open the lobby door and
the call is automatically completed
after 5 second.
Monitor speaker rings the
Press [Talk/Menu] button
calling sound, and call is
one more time to complete the call.
connected when pressing
[Talk/Menu] button
(Talking time : 3 minute).
Instructions for operation
◆ When make call to Guard Room
Press [Guard/Lobby]
button
to call
one more
Guard Room.
◆ Internal call & communication
MONITOR A
Press and hold
[Door/Interphone] button
for 2 seconds.
MENU Setting
To enter to Menu for setting, turn off and on the monitor and immediately in 1 minute push Talk/Menu button
than 2 seconds. Press Talk/Menu button
1. ID
2. CAM
C60
3. CAM1
4. CAM2
one more
5. MIC
6. MODE
7. SYNC
8. INIT
1. ID Setting :
Pressing <Confirm> button
2. CAM / LB Setting : Need to change setting according to the door camera and lobbyphone model.
3. CAM1 VIEW TIME Setting : Able to set CAM1's VIEW TIME to 1 MIN or 3 MIN.
4. CAM2 VIEW TIME Setting : Able to set CAM2's VIEW TIME to 1 MIN or 3 MIN.
5. MIC : Able to change the MIC volume between levels 1-5 level (audio volume to the receiver).
6. MODE Setting : Identified by OLD and NEW version of interconnected Lobby Phone.
■OLD MODE : Able to set House ID Number up to 1~63, 100~963, 1000~1963, 2000~2963, and 3000~3963.
■NEW MODE: Able to set House ID Number continuously between 1~1599.
7. SYNC Setting : When connecting Lobby Phone it can select the PAL/NTSC spec of the Lobby Phone
8. INIT Setting : Initialize the setting of Menu Setup.
Call is connected when
Guard Room answers
the call.
(Talking time : 3 minute)
MONITOR B
Additional monitor rings the
calling sound. Press [Talk/Menu]
button
to connect the call
(Talking time : 3 minute).
shortly one more time to complete the setup.
Definition of Menu Mode Button
0001
UP Button : [Guard/Lobby] Button
LB
C100
DOWN Button : [Door/Interphone] Button
VIEW TIME 1MIN
Confirm Button : [Door Open] Button
VIEW TIME 1MIN
3
OLD
PAL
NO
will move to House Number, and House ID can be changed using <UP/DOWN> button.
Press [Guard/Lobby] button
one more time to complete the call.
Press [Talk/Menu] button
one more time to complete
the call.
for more
11
Advertisement
