Panasonic PAN1780 Integration Manual page 36


PAN1780 Bluetooth Module
6.2.5 Approved Antenna List
Item Part Number
1 ANT016008LCS2442MA1 TDK
6.2.6 RF Exposure
To comply with FCC RF Exposure requirements, the OEM must ensure that
only antennas from the Approved Antenna List are installed
Antenna
The preceding statement must be included as a "CAUTION" statement in
manuals for products operating with the approved antennas to alert users on
FCC RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the
integrated radio module is not allowed.
The radiated output power of the PAN1780 with a mounted ceramic antenna
(FCC ID: T7V1780) is below the FCC radio frequency exposure limits.
Nevertheless, the PAN1780 shall be used in such a manner that the potential
for human contact during normal operation is minimized.
End users may not be provided with the module installation instructions.
OEM integrators and end users must be provided with transmitter operating
conditions for satisfying RF exposure compliance.
Module Integration Guide Rev. 1.1
Manufacturer Frequency Band
2.4 GHz
List.
6 Regulatory and Certification Information
Type
Chip Antenna
 6.2.5 Approved
Max. Gain (dBi)
-1.0
Page 36 of 44