Panasonic PAN1780 Integration Manual page 33


PAN1780 Bluetooth Module
1. Click on the slider (1) to toggle the LED3 on PAN1780 ETU.
The button "SW1" on PAN1780 can be pressed, to send status of the button to the
2.
mobile app (2).
In parallel a terminal can be used, to get information about the current status from module via
UART:
1. Connect the PAN1780 on USB port X2 to the PC.
2. Open the COM port of PAN1780 with the following configuration:
–
Baud 115200
–
Data 8
–
Parity N
–
Stop 1
Module Integration Guide Rev. 1.1
5 Getting Started
Page 33 of 44