Configuration Settings - Panasonic PAN1780 Integration Manual


PAN1780 Bluetooth Module

4.5 Configuration Settings

Jumper JP11
Do not place JP11, if an external 3.3 V source is present.
After each different configuration the reset button needs to be pressed.
Jumper Layout
JP1
Module Integration Guide Rev. 1.1
Description
5 V from USB connected
5 V from or to breakout pin
connected
4 Reference Design
5 V power option, to power
the board from USB or the 5 V
pin. The 5 V from USB can
also be used to power the
sensor board.
Page 16 of 44