Table of Contents
Advertisement
Surface Units and Reflector Bowls
Removing
Burn and Electrical
Shock Hazard
Make sure all surface
units are OFF before
removing
surface
units and reflector
bowls.
Failure to do so can result in burns or elec-
trical
shock.
1.
Turn off all surface units.
2. Lift the edge of the unit, opposite
the receptacle, just enough to
clear the element hold down clip
and the reflector bowl.
3. Pull the surface unit straight away
from the receptacle.
4. Lift out the reflector bowl. See
" Cleaning
Chart 88 on page 22
for cleaning
instructions.
16
Advertisement
Table of Contents
